FEATURE

1.	Automatic clamps for upper dies are standard equipment. ( Die changeover time is only 60 seconds )

2.	Die changeover table ( with stockyard ) is standard equipment.

3.	Mounts a hydraulic device to serve as a power source for material handing equipment.

DIMENSIONS

Oil pressure unit

Main part

SPECIFICATIONS

Model		BHWP 600-100TA
Output		Max.100t
Motor		22 kW ( 18.5 kW )
Hydraulic pump ( pressure )		Variable capacity piston pump ( 210kg / cm2 under normal operation )
Hydraulic tank capacity		495 l ( thermal switch,oil cooler are standard equipment )
Main cylinder stroke		600 mm
Aperture dimensions		W 700 ( 900 ) × H 1000 × D 650 ( mm )
Speed	Lowering	70 mm/sec ( 60 Hz ) 55 mm/sec ( 50 Hz )
	Raising	125 mm/sec
Slide stroke		650 mm
Cycle time		10.5 sec ( 60 Hz ) 13 sec ( 50 Hz )
Options		Automatic die changeover device ( upper and lower ); die changeover table; die set; unloader; loader; safety fence; area sensor. All safety doors are standard equipment. *Ask about changes or additions to these specifications.